SS 202
Austenitic chromium-nickel-manganese stainless steel developed as a cost-effective, high-yield alternative to 304. Possesses excellent deep-drawing formability, work hardening response, non-magnetic properties in annealed state, and reliable corrosion resistance for architectural, food handling, and industrial stamping components.
CHEMICAL COMPOSITION ANALYSIS
| Alloying Element | Nominal Range / Limit |
|---|---|
| Carbon (C)C | ≤ 0.15% |
| Chromium (Cr)Cr | 17.00 – 19.00% |
| Nickel (Ni)Ni | 4.00 – 6.00% |
| Manganese (Mn)Mn | 7.50 – 10.00% |
| Silicon (Si)Si | ≤ 1.00% |
| Phosphorus (P)P | ≤ 0.060% |
| Sulfur (S)S | ≤ 0.030% |
| Nitrogen (N)N | ≤ 0.25% |
MECHANICAL & PHYSICAL PROPERTIES
METALLURGICAL & PROCESSING CHARACTERISTICS
Solution Annealing: Heat to 1010°C – 1080°C followed by rapid water quenching. Restores maximum corrosion resistance and eliminates work-hardening stresses.
Cold Rolled 2B, Bright Annealed (BA), No.4 Hairline, Mirror 8K with protective PVC laser film, or Hot Rolled Annealed & Pickled (No.1).
Good resistance to atmospheric conditions, fresh water, and organic mild chemicals; widely selected for indoor and architectural sheltered outdoor environments.
Readily weldable using standard fusion and resistance processes (TIG, MIG, Resistance Spot). Matching filler metals: AWS ER308 or ER202.
KEY ENGINEERING ADVANTAGES
- Higher yield strength (~260 MPa) compared to standard 304 (~205 MPa)
- High work-hardening rate providing high structural strength in formed parts
- Superior deep drawing and bending capacity with low springback
- Cost-effective nickel-optimized formulation using manganese and nitrogen
- Ready stock available in coils, sheared sheets, cut plates, and bright bars
STOCK FORMS & IN-HOUSE CUTTING
PROVEN INDUSTRIAL APPLICATIONS
Architectural wall cladding, elevator interiors, commercial kitchen equipment, sinks and catering counters, restaurant cookware, automotive window channels and wiper arms, electrical enclosures, railway coach structural panels, and precision metal pressings.

NEED SS 202?
Send us your required dimensions for immediate price & dispatch confirmation:
- Thickness, Width or Diameter (mm)
- Cut Length / Quantity (Pieces or kg)
- Desired Form (Sheets / Plates / Rounds / Flats)
- Surface Finish & Test Requirements
ENQUIRE ABOUT SS 202
Tell us your required dimensions, cut lengths, and quantity. Ashish Shah and our commercial desk will confirm stock availability and supply mill test certification.

